Gehl Utility Loader Specifications

-Performance- -Dimensions- -Engine- Hydraulic System-
-Steering- -Brakes- Electrical System- -Capacities-

-Features-

PERFORMANCE
Operating Weight (SAE) (approx.) (kg) 2050 lbs. (930)
Tipping Capacity (SAE) (kg) 1400 lbs. (635) with liftarm retracted
Rated Operating Load (SAE) (kg) 700 lbs. (320) with liftarm retracted
Travel Speed (km/h) 0 - 6.8 mph (0 - 11)

-Top of Page-

DIMENSIONS
Overall Length (less bucket) (mm) 88” (2235)
Overall Height w/ROPS (mm) 78” (1980)
Overall Width - less bucket (mm) 40” (1016)
Overall Width with bucket (mm) 41” (1041)
Wheelbase (mm) 43” (1090)
Ground Clearance (mm) 8” (200)
Lift Height to Hinge Pin (mm) 95.5” (2425) with liftarm extended
Dump Angle 30 degrees
Dump Reach (mm) 31.4” (798)
Bucket Rollback Angle 80 degrees
Gradeability 30 degrees

-Top of Page-

ENGINE
Manufacturer Kubota
Type Water-cooled Diesel
Power (kW) 20 hp (15)
Cylinders 3

-Top of Page-

HYDRAULIC SYSTEM
Pumps 2
Auxiliary - Dual Pump (L/min) 5.3 / 10.6 gpm (20 / 40)
Rated Pressure (bar) 2900 psi (200)
Filtration 10 Micron

-Top of Page-

STEERING
Type Articulated Frame
Inside Turning Radius (mm) 35” (890)
Outside Turning Radius (mm 79” (2010)

-Top of Page-

BRAKES
Primary Hydrostatic
Parking Mechanical

-Top of Page-

ELECTRICAL SYSTEM
Battery 12-volt, 450 CCA
Alternator 12-volt, 20-amp
Starter 12-volt

-Top of Page-

CAPACITIES
Fuel (L) 4.8 gal. (18.2)
Hydraulic (L) 7.9 gal. (29.9)
Engine Oil (L) 4.0 qts. (3.8)