Model 4840E Skid Loader

Other Skid Loader Models

-Model 4840 Specs.-

Great Skid Loaders Should be Seen and not Heard.

With a high-horsepower Deutz engine, high operating loads and exceptional hydraulic power, the Model 4840E doesn't mind getting dirty. And innovative accoustical cab materials makes it quieter, both inside and out.

  • Rated Operating Load (kg): 1900 lbs. (862)
  • Net Power (kW): 60 hp (45) @2500 rpm
  • Overall Operating Height (Fully Raised): 149” (3785)
  • Overall Width: 63.5” (1613)
  • Length w/66" bucket: 126.3” (3208)
STANDARD EQUIPMENT
  • Accoustical Material and Headliner
  • Adjustable Operator Restraint Bar with Armrests
  • All-Tach™ Attachment System: Two-Lever (manual)
  • Anti-Vandalism Rear Door
  • Battery Charge Indicator Lamp
  • Bi-directional Auxiliary Hydraulics with Flat-Faced Couplers
  • Controls: T-bar "Hands-only, Hand/Foot, Dual Hand, or T-Bar Joystick (4640E Turbo only)
  • Coolant Temperature Gauge and Indicator Light
  • Dual-Element Air Cleaner with Visual Indicator
  • Dual Front and Rear Halogen Work Lights and Dual Tail Lights
  • Engine Auto-Shutdown System
  • Foot Throttle (T-Bar and Dual Hand only)
  • Fuel Level Gauge
  • Hourmeter
  • Hydraloc™ System – Brakes and Interlock for Starter, Lift/Tilt Cylinders,
  • Auxiliary Hydraulics and Wheel Drives
  • Interior Dome Light
  • Oil Pressure Indicator Light
  • Powerview® Lift Arm
  • Pre-Heat Starting Assist
  • ROPS/FOPS ISO Level II
  • Seatbelt Indicator Light and Buzzer
  • Self-Leveling Lift Action
  • Servo-Controlled Hydrostatic Drive
  • Skid Plate for Clean Out

OPTIONAL EQUIPMENT

  • 2-speed Transmission
  • 3-inch Wide Seatbelt – When Required
  • Audible Back-up Alarm
  • Adjustable Suspension Seat
  • Bi-directional High-Flow Auxiliary Hydraulics with Flat-Faced Couplers
  • Bucket Bolt-on Cutting Edge Kits
  • Centrifugal Pre-Cleaner
  • Engine Pan Heater
  • Four-point Lift Kit
  • Front Door with Wiper
  • Horn
  • Hydraulic Couplers Kit
  • Hydraulic Oil Filter Indicator Light
  • Hydraglide™ Ride Control System
  • Impact-Resistant Front Door
  • Operator's Compartment Heater/ Defroster/Air Conditioner
  • Power-A-Tach™ Attachment Mounting System
  • Rear-View Mirror
  • Single-point Lift Kit
  • Sliding Side Windows
  • Spark Arresting Muffler
  • Strobe Light
  • Upper-torso Restraint (required with 2-speed transmission)

Model 4840 SPECIFICATIONS

DIMENSIONS:
Overall Operating Height (mm) 149" (3785)
Height to Hinge Pin (fully raised) (mm) 115.5" (2934)
Overall Height (to top of ROPS) (mm) 78" (1981
Ground Clearance to Chassis (mm) 7.5" (191)
Overall Length (mm 126.3" (3208) w/66" bucket
Overall Length (w/o bucket) 93.3" (2370)
Wheelbase (mm) 41.5" (1054)
Dump Reach (full height) (mm) 27.6" (701)
Rollback at Ground 27°
Dump Angle 40°
Overall Width (mm) 63.5" (1613)
Bucket Width (mm) 66" - 75" (1679 - 1905)
Clearance Circle (rear) (mm) 61.5" (1562)
Clearance Circle (front, w/o bucket) (mm) 48" (1219)
Clearance Circle (front, w/bucket) (mm 76.0" (1930)
Seat to Ground Height (mm) 37.5" (953)
Rollback at Full Height (mm) 86°
Dump Height (mm) 89.5" (2273)
Departure Angle 25°
Standard Tire Size 10.00x16.5 HD

ENGINE
Make Deutz
Model F4M2011
Net Power (kW) @ rpm 60 hp (45) @ 2500
Displacement (L) 190 cu.in. (3.1)
HYDRAULIC SYSTEM
Auxiliary Hydraulics - Standard (L/min 19 gpm (72)
High-Flow Hydraulics - Optional (L/min) 30 gpm (114)
Filtration 4 micron
Reservoir Capacity (L) 12 gal. (45)
ELECTRICAL SYSTEM
Battery 12-volt (950 CCA)
Starter (kW) 12-volt (2.3)
Alternator 95-amp.
CAPACITIES AND WEIGHTS
Rated Operating Load (kg) 1900 lbs. (862)
Rated Operating Load with opt. Counterweight (kg) 2050 lbs. (930)
Tipping Capacity (kg) 3800 lbs. (1724)
Fuel Tank (L) 15 gal. (56)
Travel Speed (km/h):
-with/Joystick 8.8 mph (14.2)
- with 2-speed drive option 14.0 mph (22.5)
-w/o Joystick 7.7 mph (12)
- Max 12.4 mph (20)
Operating Weight - approx. (kg) 6200 lbs. (2812)